What to do if you find that your computer keeps booting to BIOS? Many Windows users are troubled by this issue and seeking solutions. Here, NewsPivot compiles a couple of solutions to help you out of the BIOS loop.   

Your Computer Keeps Going to BIOS

You may unexpectedly encounter various computer errors, like the blue screen of death, randomly restarting, not booting, etc. In addition to these errors, you probably find your computer keeps booting to BIOS instead of accessing Windows operating systems.

If you are stuck in this BIOS loop, don’t panic. Many Windows users encounter this problem as well. Generally, it can be triggered by incompatible external devices, misconfiguration of computer settings, CMOS battery errors, etc.

Learn more: When Your PC Can’t Access BIOS, Try These Methods Now

Here are some practical methods to help you get rid of this annoying error. Keep reading and try them.

How to Fix Computer Keeps Booting to BIOS

Method 1: Disconnect All Removable Devices & Check Hardware Connection

Sometimes, inserted removable devices will interfere with the normal startup process of your computer. If you have connected any external devices to your computer, please remove them and try to restart the computer.

If you have moved your computer around recently but didn’t connect hardware properly, you may find the computer keeps going to BIOS. Check all the device cables are well and properly connected, then reboot your computer.

Method 2: Check Boot Order

If there is a wrong boot order on your computer, your computer will not boot up and probably enter BIOS automatically. You should check whether the disk is the primary boot option in BIOS. If not, adjust the boot order to make your computer boot from the hard disk.

If you can’t find your hard drive in BIOS, check if the hard disk is correctly plugged in and test the disk on another computer. If the hard disk works properly on another PC, the problem may be with the motherboard. You should ask for help from professionals.

Also read: Useful Fixes: “Selected Boot Image Did Not Authenticate” Error

Method 3: Run Windows Repair

When your computer boots into BIOS automatically, try to fix it by performing Windows Repair with a recovery disk.

If you don’t have a recovery disk and your computer can’t boot up normally, you can create a recovery USB drive from another computer. When the bootable USB drive is created, you need to connect it to your problematic computer and boot from this USB device.

Click Repair your computer at the bottom left to enter WinRE. Then, you should navigate to Troubleshoot > Advanced options > Startup Repair.

choose Startup Repair

Just follow the on-screen instructions to complete the rest steps. This helps to fix existing errors and make your computer boot normally.

Method 4: Check the CMOS Battery

CMOS battery, located on the motherboard, is used to power the BIOS firmware and store BIOS settings on your computer. If the CMOS battery goes wrong, your computer may experience various errors. For instance, the computer keeps booting to BIOS.

To resolve the CMOS battery issue, you need to shut down the computer and find and remove the CMOS battery. After a few seconds, put the battery back and restart the computer to see whether your computer performs normally.

Related post: How to Fix The CMOS Checksum Is Invalid Error on Windows

Bottom Line

When finding your computer keeps booting to BIOS, you can try the above four methods to get out of the BIOS loop. Hope this post provides you with useful information.

  • linkedin
  • reddit