How to fix the no signed device drivers were found error? It is a roadblock when installing Windows, indicating missing drivers. Many users come across this error and the PC won’t boot anymore. If you are also struggling with this issue, NewsPivot gives you some useful tips for troubleshooting.

No Signed Device Drivers Were Found

This “no signed device drivers were found” error often occurs when the Windows installer can’t find the needed device drivers from the installation media. The driver may get missing or corrupted and that’s why the installer can’t identify it.

Most users will fail to boot your PC and repeatedly receive this error message. In this way, try the following methods for troubleshooting.

Fix: No Signed Device Drivers Were Found

Fix 1: Change USB Port

Consider that some users prefer to use a USB flash drive to create Windows installation media, the universal serial bus (USB) port you’re using may cause some compatibility issues.

You can try to plug the USB into another port. For example, if you are using USB 3.0, switch it to a USB 2.0 port.

Fix 2: Make Sure the Partition Is Active

You need to make sure the partition, where your Windows will be installed, is labeled as active. If it is not marked as active, the boot will fail and the “no device drivers were found” message will repeatedly appear. To set the partition as active, you can do as follows.

Step 1: Plug in the installation media and boot the PC from it to choose Repair your computer.

Step 2: Then choose Troubleshoot > Advanced options > Command Prompt.

Step 3: When the window opens, type the following commands one by one and press Enter after each of them.

  • diskpart
  • list volume
  • select volume * (* stands for the partition drive letter where you want to install OS.)
  • active
execute the commands

Now, you can try the installation again and check if the “no signed device drivers were found” error has been gone.

Fix 3: Enable Legacy Boot

Some users enabled Secure Boot but this feature will limit the boot-up, causing “no signed device drivers were found”. You can switch it to Legacy Boot.

Step 1: Enter BIOS by pressing a dedicated key and go to the Security tab.

Step 2: Choose Secure Boot Configuration and find Secure Boot to disable it, according to the displayed instructions.

Step 3: Then find Legacy Support and enable it. Save the changes and boot your PC from the installation media.

Fix 4: Create a New Installation Media

To fix this Windows installation error, you can try to create a new installation media.

Step 1: Prepare a USB drive with at least 8 GB of space and connect it to your device.

Step 2: Download the Windows Media Creation Tool from the official website and then click the Download tool now button under the wanted section.

click the Download tool now button

Step 3: Run the exe file, choose options based on the prompts, and select USB flash drive.

Step 4: Follow the on-screen instructions to finish that and create a Windows bootable USB drive via Rufus.

After that, you can try this new disc to check if your device can be booted successfully.

Back up Your System

Many users are stuck in this issue – no signed device drivers were found and can’t boot their system. If you have a data backup, you can perform a quick restore and get everything back.

There are lots of backup programs on the internet to help perform system backup and restore with multiple backup solutions, and quickly get your system up in the event of system crash or hardware failure. When your PC fails to boot, you can use such tools to create a bootable drive to restore the system to the previous state.

Bottom Line

How to fix the Windows installation error – no signed device drivers were found? After reading this article, you may have a general understanding. Try these methods one by one and some of them may fix it up.

  • linkedin
  • reddit